ဒါေတြကို အရင္ ေဒါင္းလိုက္ပါ....
CF-Auto-Root-hlte-hltexx-smn9005.zip
Odin (v3.07)
androidzawgyi
၁။ အားလံုးကို တစ္ခုခ်င္းဇစ္ျဖည္လိုက္ပါ.... odinကို ဖြင့္ျပီး PDA မွာ
CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 ကိုေရြးလိုက္ပါ...
၂။ ဖုန္းကို ပါ၀ါပိတ္ျပီး Volume Down + Home + Power buttons ႏွိပ္ပါ
Download Mode ေပၚလာရင္... Volume Up key ႏွိပ္ျပီး ဖုန္းကိုကြန္ပ်ဴတာနဲ႕ ခ်ိတ္လိုက္ပါ...
၃။ Odin မွာ ရွိတဲ့ Start button ကိုႏွိပ္လိုက္ပါ... Odin ရဲ႕ installation
လုပ္ေဆာင္ေနတာကို ျပီးေအာင္ေစာင့္ပါ... PASS! message ျပျပီဆိုတာနဲ႕ ဖုန္းဟာ reboot
လုပ္ေဆာင္သြားပါလိမ့္မယ္... စိတ္ရွည္ရွည္နဲ႕ ျပီးေအာင္ေစာင့္ေစခ်င္ပါတယ္...
၄။ ဖုန္းျပန္တက္လာျပီဆိုလွ်င္... ထံုးစံအတိုင္းပါပဲ....
androidzawgyi ဆိုတဲ့ Folder ထဲက ဖိုင္(၃)ဖိုင္ကို ဖုန္းရဲ႕
SD ကစ္ထဲမွာထည့္ျပီး အင္စေတာလုပ္လိုက္ပါ... ျပီးသြားျပီေပါ့.... လြယ္ပါတယ္ဗ်ာ.... အဆင္မေျပတာေလးေတြရွိရင္ ကြန္မန္႕ေပးထားခဲ့ပါ....
- Download CF-Auto-Root package for SM-N9005 (extract the zip): CF-Auto-Root-hlte-hltexx-smn9005.zip
- Download Samsung USB Drivers or latest Kies on your PC. If you do not have either of them, download here.
- If you also want to install a custom recovery on your Note 3 SM-N9005, download the latest PhilZ Advanced recovery with .tar.md5 extension: philz_touch_6.13.0-hltexx.tar.md5
- Installing a new firmware might wipe the apps and data present on the internal SD, so it is recommended that you backup your data. Here are a few apps that will help you do that.
- Turn on USB Debugging on your Note 3. Read this guide to know how to do it.
- Make sure to charge your device to a decent level before starting.
Root Galaxy Note 3 SM-N9005:
If you are not new to the Android scene and have owned a Galaxy phone or tablet, you might like to be told how to install files using Odin tool. But if it is your first time, follow the steps given below.- Open the CF-Auto-Root folder and launch Odin 1.85 as administrator.
- Turn off your Note 3 and put it into Download Mode. This is how you can do it: turn off the device, and press Volume Down + Home + Power buttons at the same time for about 2-3 seconds. When the screen turns up, you’ll be prompted to press the Volume Up key. Press it to enter Download Mode.
- Connect your Note 3 LTE to computer using USB cable.
- Wait till Odin detects your device and you see “Added!!” in message box on Odin and Blue signal at the ID:COM port.
- Now click on the PDA button and select the file with .tar.md5 extension.
- When you are satisfied that everything is fine, click the Start button on Odin.
- The installation procedure will now be initiated. Wait till it is done and you see PASS! message with Green indicator.
- Your device will then reboot automatically. The first boot takes a little longer time that normal reboot, so wait patiently.
- Download CF-Auto-Root package for SM-N9005 (extract the zip): CF-Auto-Root-hlte-hltexx-smn9005.zip
- Download Samsung USB Drivers or latest Kies on your PC. If you do not have either of them, download here.
- If you also want to install a custom recovery on your Note 3 SM-N9005, download the latest PhilZ Advanced recovery with .tar.md5 extension: philz_touch_6.13.0-hltexx.tar.md5
- Installing a new firmware might wipe the apps and data present on the internal SD, so it is recommended that you backup your data. Here are a few apps that will help you do that.
- Turn on USB Debugging on your Note 3. Read this guide to know how to do it.
- Make sure to charge your device to a decent level before starting.
Root Galaxy Note 3 SM-N9005:
If you are not new to the Android scene and have owned a Galaxy phone or tablet, you might like to be told how to install files using Odin tool. But if it is your first time, follow the steps given below.- Open the CF-Auto-Root folder and launch Odin 1.85 as administrator.
- Turn off your Note 3 and put it into Download Mode. This is how you can do it: turn off the device, and press Volume Down + Home + Power buttons at the same time for about 2-3 seconds. When the screen turns up, you’ll be prompted to press the Volume Up key. Press it to enter Download Mode.
- Connect your Note 3 LTE to computer using USB cable.
- Wait till Odin detects your device and you see “Added!!” in message box on Odin and Blue signal at the ID:COM port.
- Now click on the PDA button and select the file with .tar.md5 extension.
- When you are satisfied that everything is fine, click the Start button on Odin.
- The installation procedure will now be initiated. Wait till it is done and you see PASS! message with Green indicator.
- Your device will then reboot automatically. The first boot takes a little longer time that normal reboot, so wait patiently.
- Download CF-Auto-Root package for SM-N9005 (extract the zip): CF-Auto-Root-hlte-hltexx-smn9005.zip
- Download Samsung USB Drivers or latest Kies on your PC. If you do not have either of them, download here.
- If you also want to install a custom recovery on your Note 3 SM-N9005, download the latest PhilZ Advanced recovery with .tar.md5 extension: philz_touch_6.13.0-hltexx.tar.md5
- Installing a new firmware might wipe the apps and data present on the internal SD, so it is recommended that you backup your data. Here are a few apps that will help you do that.
- Turn on USB Debugging on your Note 3. Read this guide to know how to do it.
- Make sure to charge your device to a decent level before starting.
Root Galaxy Note 3 SM-N9005:
If you are not new to the Android scene and have owned a Galaxy phone or tablet, you might like to be told how to install files using Odin tool. But if it is your first time, follow the steps given below.- Open the CF-Auto-Root folder and launch Odin 1.85 as administrator.
- Turn off your Note 3 and put it into Download Mode. This is how you can do it: turn off the device, and press Volume Down + Home + Power buttons at the same time for about 2-3 seconds. When the screen turns up, you’ll be prompted to press the Volume Up key. Press it to enter Download Mode.
- Connect your Note 3 LTE to computer using USB cable.
- Wait till Odin detects your device and you see “Added!!” in message box on Odin and Blue signal at the ID:COM port.
- Now click on the PDA button and select the file with .tar.md5 extension.
- When you are satisfied that everything is fine, click the Start button on Odin.
- The installation procedure will now be initiated. Wait till it is done and you see PASS! message with Green indicator.
- Your device will then reboot automatically. The first boot takes a little longer time that normal reboot, so wait patiently.
- Download CF-Auto-Root package for SM-N9005 (extract the zip): CF-Auto-Root-hlte-hltexx-smn9005.zip
- Download Samsung USB Drivers or latest Kies on your PC. If you do not have either of them, download here.
- If you also want to install a custom recovery on your Note 3 SM-N9005, download the latest PhilZ Advanced recovery with .tar.md5 extension: philz_touch_6.13.0-hltexx.tar.md5
- Installing a new firmware might wipe the apps and data present on the internal SD, so it is recommended that you backup your data. Here are a few apps that will help you do that.
- Turn on USB Debugging on your Note 3. Read this guide to know how to do it.
- Make sure to charge your device to a decent level before starting.
Root Galaxy Note 3 SM-N9005:
If you are not new to the Android scene and have owned a Galaxy phone or tablet, you might like to be told how to install files using Odin tool. But if it is your first time, follow the steps given below.- Open the CF-Auto-Root folder and launch Odin 1.85 as administrator.
- Turn off your Note 3 and put it into Download Mode. This is how you can do it: turn off the device, and press Volume Down + Home + Power buttons at the same time for about 2-3 seconds. When the screen turns up, you’ll be prompted to press the Volume Up key. Press it to enter Download Mode.
- Connect your Note 3 LTE to computer using USB cable.
- Wait till Odin detects your device and you see “Added!!” in message box on Odin and Blue signal at the ID:COM port.
- Now click on the PDA button and select the file with .tar.md5 extension.
- When you are satisfied that everything is fine, click the Start button on Odin.
- The installation procedure will now be initiated. Wait till it is done and you see PASS! message with Green indicator.
- Your device will then reboot automatically. The first boot takes a little longer time that normal reboot, so wait patiently.
- Download CF-Auto-Root package for SM-N9005 (extract the zip): CF-Auto-Root-hlte-hltexx-smn9005.zip
- Download Samsung USB Drivers or latest Kies on your PC. If you do not have either of them, download here.
- If you also want to install a custom recovery on your Note 3 SM-N9005, download the latest PhilZ Advanced recovery with .tar.md5 extension: philz_touch_6.13.0-hltexx.tar.md5
- Installing a new firmware might wipe the apps and data present on the internal SD, so it is recommended that you backup your data. Here are a few apps that will help you do that.
- Turn on USB Debugging on your Note 3. Read this guide to know how to do it.
- Make sure to charge your device to a decent level before starting.
Root Galaxy Note 3 SM-N9005:
If you are not new to the Android scene and have owned a Galaxy phone or tablet, you might like to be told how to install files using Odin tool. But if it is your first time, follow the steps given below.- Open the CF-Auto-Root folder and launch Odin 1.85 as administrator.
- Turn off your Note 3 and put it into Download Mode. This is how you can do it: turn off the device, and press Volume Down + Home + Power buttons at the same time for about 2-3 seconds. When the screen turns up, you’ll be prompted to press the Volume Up key. Press it to enter Download Mode.
- Connect your Note 3 LTE to computer using USB cable.
- Wait till Odin detects your device and you see “Added!!” in message box on Odin and Blue signal at the ID:COM port.
- Now click on the PDA button and select the file with .tar.md5 extension.
- When you are satisfied that everything is fine, click the Start button on Odin.
- The installation procedure will now be initiated. Wait till it is done and you see PASS! message with Green indicator.
- Your device will then reboot automatically. The first boot takes a little longer time that normal reboot, so wait patiently.
- Download CF-Auto-Root package for SM-N9005 (extract the zip): CF-Auto-Root-hlte-hltexx-smn9005.zip
- Download Samsung USB Drivers or latest Kies on your PC. If you do not have either of them, download here.
- If you also want to install a custom recovery on your Note 3 SM-N9005, download the latest PhilZ Advanced recovery with .tar.md5 extension: philz_touch_6.13.0-hltexx.tar.md5
- Installing a new firmware might wipe the apps and data present on the internal SD, so it is recommended that you backup your data. Here are a few apps that will help you do that.
- Turn on USB Debugging on your Note 3. Read this guide to know how to do it.
- Make sure to charge your device to a decent level before starting.
Root Galaxy Note 3 SM-N9005:
If you are not new to the Android scene and have owned a Galaxy phone or tablet, you might like to be told how to install files using Odin tool. But if it is your first time, follow the steps given below.- Open the CF-Auto-Root folder and launch Odin 1.85 as administrator.
- Turn off your Note 3 and put it into Download Mode. This is how you can do it: turn off the device, and press Volume Down + Home + Power buttons at the same time for about 2-3 seconds. When the screen turns up, you’ll be prompted to press the Volume Up key. Press it to enter Download Mode.
- Connect your Note 3 LTE to computer using USB cable.
- Wait till Odin detects your device and you see “Added!!” in message box on Odin and Blue signal at the ID:COM port.
- Now click on the PDA button and select the file with .tar.md5 extension.
- When you are satisfied that everything is fine, click the Start button on Odin.
- The installation procedure will now be initiated. Wait till it is done and you see PASS! message with Green indicator.
- Your device will then reboot automatically. The first boot takes a little longer time that normal reboot, so wait patiently.
No comments :
Post a Comment